Always refer to packaging for directions

Always test OxiClean™ on an inconspicuous area first. Rinse, and allow to dry. Safe on colorfast fabrics only. Always follow manufacturer’s instructions for water temperature and for cleaning garment or item. Do not use on wool, wool blends, silk, silk blends, leather or on fabrics labeled dry clean only.

MIX Fill scoop to line 2 to 4 per 1 gallon of water. Submerge stained items in solution after dissolved. Line 2 for typical stains or Line 4 for extra-tough stains.

SOAK 1-6 hours. Depending on severity of stain, some stains may require more time to soak. For best results soak for 6 hours.

WASH as normal with detergent and OxiClean™.

Always refer to packaging for directions and use only on water-washable rugs.

MIX Fill to line 1 per 16 ounces of water. Remove excess stains before treating.

APPLY only enough solution to saturate stain. Allow solution to stand 1-5 minutes. Do not allow solution to dry on fabrics. Blot with white towel. Repeat until stain is not visible. Rinse carpet with clean water and blot until dry.

Always refer to packaging for directions and use only on water-washable upholstery.

MIX Fill to line 1 per 16 ounces of water. Remove excess stains before treating.

TREAT Do not apply solution directly on stain. Apply with clean white towel and use towel to blot out stain. Repeat until stain is not visible. Then, dampen a clean white towel with water and blot area to rinse.

Always refer to packaging for directions

MIX Fill to line 4 per gallon of water. Note: for some surfaces, a more concentrated solution/paste may be used.

APPLY using a cloth, sponge, brush or by pouring solution directly onto surface.

LET STAND 5-30 min. Scrub as needed. For large surfaces, work with small areas, so solution does not dry on the surface.

RINSE well with cool water.

FOR CLOTHING

Always refer to packaging for directions

MIX Fill scoop to line 2 to 4 per 1 gallon of water. Submerge stained items in solution after dissolved. Line 2 for typical stains or Line 4 for extra-tough stains.

SOAK 1-6 hours. Depending on severity of stain, some stains may require more time to soak. For best results soak for 6 hours.

WASH as normal with detergent and OxiClean™.

FOR CARPET

Always refer to packaging for directions and use only on water-washable rugs.

MIX Fill to line 1 per 16 ounces of water. Remove excess stains before treating.

APPLY only enough solution to saturate stain. Allow solution to stand 1-5 minutes. Do not allow solution to dry on fabrics. Blot with white towel. Repeat until stain is not visible. Rinse carpet with clean water and blot until dry.

FOR UPHOLSTERY

Always refer to packaging for directions and use only on water-washable upholstery.

MIX Fill to line 1 per 16 ounces of water. Remove excess stains before treating.

TREAT Do not apply solution directly on stain. Apply with clean white towel and use towel to blot out stain. Repeat until stain is not visible. Then, dampen a clean white towel with water and blot area to rinse.

Always refer to packaging for directions

MIX: Fill to line 4 per gallon of water. Note: for some surfaces, a more concentrated solution/paste may be used.

APPLY using a cloth, sponge, brush or by pouring solution directly onto surface.

LET STAND: 5-30 min. Scrub as needed. For large surfaces, work with small areas so solution does not dry on the surface.

RINSE well with cool water.

MIX Fill to line 4 per gallon of water.

APPLY using a cloth, sponge, brush or by pouring solution directly into trash can.

Scrub as needed. Do not soak; work with small areas so solution does not dry on the surface.

RINSE immediately and thoroughly with cool water.